Kimchi production technology

First, the process of cabbage → to the outer leaves → washing → cutting → mounting altar (kimchi water, spices, liquor). Second, the formula water 10 kg, 5 kg of cabbage, salt 380 grams, 15 grams of star anise, sugar 600 grams, 7.5 grams of pepper, pepper 12 grams, 7.9 grams of dried tangerine peel, pepper 2. Garlic 4 valves, citric acid (or vinegar) 0.5 grams. Third, production 1. Raw material treatment: Wash the cabbage with the skin removed, drain the water and cut into 6 parts. 2. Weighing ingredients: Weigh materials according to the formula, spare. 3. Preparation of kimchi water: Water, salt, sugar, citric acid (or vinegar) are mixed to make kimchi water, and placed for use. 4. The production of spice packs: The octagon, pepper, pepper, dried tangerine peel, pepper and garlic are wrapped in gauze and made into a spice bag. Put on the altar fermentation: dry the kimchi jars and dry them, place the kale crusts underneath, put the spices in the middle, put the cabbage in the middle, put the kimchi into the kimchi water until it hasn't been used, and add a small amount of white wine. The lid of the altar is sealed with clear water. It matures in 20 days. Kimchi is beautiful in color, crisp and delicious, slightly sweet. After an altar is eaten, kimchi water can be added with new vegetables. Not only can it be placed in cabbage, but also radishes, peppers, or other vegetables. Can be used all year long, but always pay attention to the clear water of the mouth of the altar. If it evaporates, add it immediately. Avoid grease into the altar.

Joist Tape

Joist Tape Deck Flashing Tape Butyl Joist Tape for Decking

The Joist Tape is a malleable polyethylene waterproof wood flashing and material, using a rubberized asphalt mastic adhesive. Rot is caused by moisture that stays in contact with treated and untreated lumber deck framing and the above decking material. Wood decay can also occur when deck screws penetrate the deck boards, piercing the joist sub-framing below. The deck joist tape is easily apply to decking joists, around deck support posts and over ledger boards, which creates a waterproof seal that helps stop decay and wood rot.

The joist tape for decking as a barrier, it can reduce moisture damage to crossbeams. The joist butyl tape is used in temperatures range of -20°F to 176°F, it protects and maximizes the life of your new deck and creates a waterproof membrane that prevents wood rot caused by moisture.

Product Name	Butyl Joist Tape
Material	high-density polyethylene (HDPE)
Adhesive	Pressure Sensitive
PE Film	White, other colors can be customized
Butyl Rubber	white, other colors can be customized
Application	Providing corrosion protection

How To Use The Joist Tape for Decking

The joist tape for decking is easy to install just in seconds. Clean the adherend surface, cut the appropriate length as needed, peel off the protected film, and carefully press the tape against target area. Mistakes are easily rectified within the first few minutes of installation.

Joist Tape,Deck Joist Tape,Joist Tape for Decking,Joist Tape for Decks,Butyl Joist Tape

Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.yuhuanptapes.com