There are many different types of drying equipment. However, rotary vacuum dryer is one of them. When we use the rotary vacuum dryer, we must first vacuum, then heat up and operate the equipment. Then why do you want to do this?
If the heating air is pumped out by the vacuum heating and then the vacuum is pumped out, the heat is inevitably brought to the vacuum pump, which causes the vacuum pump to rise too high, which may reduce the efficiency of the vacuum pump. The workpiece is placed in a vacuum drying oven to evacuate the gas components that can be removed from the workpiece material. If the workpiece is heated first, the gas expands when heated. Due to the excellent sealing of the vacuum box, the enormous pressure generated by the expanding gas may cause the observation window tempered glass to burst. This is a potential danger. This danger can be avoided by following the procedure of first vacuuming and then heating up the heating.
The correct method of use should first vacuum and then heat up. After the rated temperature has been reached, if it is found that the degree of vacuum has decreased, then add it appropriately. This is advantageous for extending the life of the device. The heated gas is directed to a vacuum gauge and the vacuum gauge produces a temperature rise. If the temperature rise exceeds the operating temperature range specified by the vacuum gauge, the vacuum gauge may cause an indication error. Therefore, according to the above conditions, it will be better to use the rotary vacuum dryer.
If the heating air is pumped out by the vacuum heating and then the vacuum is pumped out, the heat is inevitably brought to the vacuum pump, which causes the vacuum pump to rise too high, which may reduce the efficiency of the vacuum pump. The workpiece is placed in a vacuum drying oven to evacuate the gas components that can be removed from the workpiece material. If the workpiece is heated first, the gas expands when heated. Due to the excellent sealing of the vacuum box, the enormous pressure generated by the expanding gas may cause the observation window tempered glass to burst. This is a potential danger. This danger can be avoided by following the procedure of first vacuuming and then heating up the heating.
The correct method of use should first vacuum and then heat up. After the rated temperature has been reached, if it is found that the degree of vacuum has decreased, then add it appropriately. This is advantageous for extending the life of the device. The heated gas is directed to a vacuum gauge and the vacuum gauge produces a temperature rise. If the temperature rise exceeds the operating temperature range specified by the vacuum gauge, the vacuum gauge may cause an indication error. Therefore, according to the above conditions, it will be better to use the rotary vacuum dryer.
Product categories of Car Bumper Punching Machine, we are specialized manufacturers from China, Car Front Bumper Punching Machine, Car Rear Bumper Punching Machine suppliers/factory, wholesale high-quality machine of bumper punching R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Car Bumper Punching Machine,Car Front Bumper Punching Machine,Car Rear Bumper Punching Machine
Wuxi DIZO Ultrasonic Technology Company , https://www.dizosonic.com