The so-called "track-axis driving type pastoral management machine" refers to a kind of pastoral management machine that drives the cultivating part by a walking axis, that is, the left and right driving wheels of the idyllic management machine are removed and the rotary cultivating parts are respectively mounted, and the rotary cultivating parts are used. The rotary tillage operation was carried out and the rotary machine was used to drive the management machine forward. Due to its simple structure, few transmission parts, and low cost, the machine has the characteristics of small size, low quality, flexible operation, high work efficiency (rotary plowing and soil finish) and low price, and is suitable for use in greenhouses. New farming equipment that operates in facilities and sporadic small plots. In the past two years, the total output of agricultural machinery in Beilun District of Ningbo City, Zhejiang Province has promoted 211 sets of domestically and internationally-run three-axis walking-type pastoral management machines of Ningbo Xieli, Beijing Xiaofeng, etc., and adjusted the operation structure, realized agricultural efficiency improvement and increased farmers' income. Social benefits. However, as a new machine with a unique structure, the machine has its own special methods and requirements in terms of operation and use, that is, it requires the operator to increase the size and direction of the operation force on the handrail frame according to the degree of soil hardness and water content. It achieves the purpose of adjusting the depth of cultivation, controlling the speed of advancement, or realizing turning and turning. Inappropriate operation is not only laborious, but it is difficult to display the rate. Even some agricultural management and scientific and technical personnel believe that this machine can not promote failure examples. Beilun District's promotion practice shows that mastering the correct operation and use of technology is the key to successful promotion. In view of the fact that the machine's instruction manual has not been followed, or although it has been said, it is not detailed enough, so this article makes the following additions. 1. The correct installation of the rotary knife is similar to the rotary knife on the rotary tiller. The rotary knife of the rotary knife is also divided into two kinds of left machete and right machete. Due to the counteraction of the soil on the rotary knife during the rotary tillage operation, the number of left and right machete cutters should be equal, so that the axial reaction forces of the soil cancel each other out, ensuring good straight running. In addition, the direction of the rotary blade should not be reversed, and the order of the right and left machete should be correct, so that the soil in the lower part of the transmission box can be cultivated at the same time and the cultivated land can be kept flat. 2. Rotary knife replacement Due to the new rotary knife, it is easy to stick mud and hang grass. Therefore, it is necessary to replace the worn rotary knife in several times. Replace the rotary knife seriously. Not serious after the replacement. In other words, first replace a batch of more severely worn knives, use it for a period of time, and then replace it with another batch when it is not too slimy, so as not to affect the operation with too much mud. 3, the choice of knife shaft speed The machine drive shaft that rotary knife shaft, the speed of speed 2 speed, no reverse gear. The new driver should choose to use a slow gear when he starts his work. Although the efficiency is low, he will not be at a loss. Under normal circumstances, as long as they can cope with the need to use the fast block operation, in order to improve operational efficiency.
JINAN SHANDE SECURITY TECHNOLOGY CO., LTD , https://www.sdsxlb.com