How to adjust the filling amount of the weighing type lubricating oil filling machine?

Weighing type lubricating oil filling machines are generally used in the chemical industry. The device is simple in structure, flexible in operation, so many companies are using it. How to adjust the filling amount for this kind of equipment?

1. First loosen the nut and adjust the screw to change the position of the lower rod. Therefore, the push-pull length of the syringe is also changed to achieve the purpose of free adjustment of the dispensing amount. The screw is adjusted clockwise to increment, and vice versa, where the pointer is indicated. Use a 5ml needle tube to see the side marked with 5ml, use a 10ml needle tube to see the side marked with 10ml, 20/100/500 type directly to see the ruler, the pointer is quantitative, but due to the different thickness of each needle tube, the actual component has errors, subject to the needle tube scale, It is also possible to start measuring the amount of the cup when dispensing.

2. Immediately after adjustment, the nut is tightened, so that the lower fixing rod and the crank are firmly fixed.

3. Loosen the nut and determine the correct position of the upper fixing rod according to the length of the different syringes. After the lower fixing rod is adjusted, turn the crank to turn the syringe to the top dead center, then lift the outer sleeve of the syringe upward by about 2mm to avoid The thimble is rotted and the nut is tightened before it can be turned on.

4. After the machine is assembled correctly, the switch is turned on. When the machine is working, the liquid is pulled down by the crank to drive the main color device to start normal operation. Adjust the speed governor knob, the clockwise dispensing speed is fast, and the speed is slow.

Disinfection and flushing of weighing lube oil filling machines:

1. Loosen the upper and lower set screws, remove the main injection system for overall disinfection, or disassemble separately for cleaning and disinfection.

2. Put the inlet tube in the cleaning solution to start cleaning.

3.500ml model may have errors in the actual filling, until the official filling of the money cylinder is accurate,

4. Needle tube for semi-automatic liquid filling machine, standard type 5ml or 10ml syringe for type 10, 20ml glass filler for 20ml type, and 100ml glass filler for type 100.

The above is some suggestions for the adjustment of the filling capacity of our Ruiba mechanical symmetrical heavy lubricant filling machine and the way of its disinfection and rinsing. I hope it may be useful to you.